More small solutions

Welcome to the next installment in my quick fixes series, all about the small ways we solve problems in our lives without buying new stuff. This time, I've got not three but five small solutions to talk about (though technically, one of them is still in progress). 

Quick fix #1: Earring storage

This year, Brian's birthday project for me was something I'd been needing for a while: a better way to store all my earrings. I'd been simply hanging them on the edge of a box on my dresser, which had some hair clips and other miscellaneous items stashed inside. This arrangement kept most of my earrings visible and easy to access, but it had some major downsides. For one, it could only hold earrings with shepherd's hook backs, so the few pairs I had with straight posts had to live in boxes. And more seriously, whenever I went to fish something out of the box, I'd dislodge some of the earrings and spend the next five minutes hunting for them.

Brian gave this gift to me in stages. On my birthday itself, he presented me with a sketch of his plan for a freestanding rack that could take the place of the box on my dresser. But when he found out I was actually using the box, he came up with a new design: a wall-mounted rack with several tiers. For the second stage, he built a prototype of this design out of cardboard, hung it up, and let me test it out for a few weeks to make sure it worked for me. Then, during the recent heat wave, he disappeared into the workshop (the coolest room in the house) and emerged with the final version, built out of scrap wood. The three tiers hold all my hook-back earrings, and the small tray at the bottom holds the post-back ones. And there's even a bit of room to spare in case I acquire more.

Quick fix #2: Reinforced sunglasses

About a year ago, my fit-over sunglasses cracked just above the right lens. I made two attempts to repair them with Superglue, but it didn't hold. We then tried reinforcing them with a thin strip of plastic glued across the top to bridge the gap. That repair held for several months, but last month it failed as well. So we decided to get out the big guns: plastic welding. We followed the basic procedure in this video, except we didn't remove the lens because we were afraid we wouldn't be able to get it back in. We just added a dab of glue over the break, dropped on a short length of metal snipped from a paper clip, and melted it into the plastic with the soldering gun. We also didn't go through the lengthy process of concealing the melted patch with multiple layers of glue and powdered graphite; instead, I just added a lick of black nail polish and called it good enough.

With this bit of metal shoring up the weak area, I felt pretty confident that the shades wouldn't break again—at least not in the same spot. So imagine my surprise when, last night, I pulled the sunglasses out of my pocket to find that, once again, they'd cracked right across the top over the lens. My puzzlement was short-lived, however, as I quickly realize that this time it was the left side that had broken in exactly the same way. So Brian has now repeated the entire procedure on the left side of the glasses. They don't look terribly pretty, but they should hold up, at least in this particular area.

Quick fix #3: Car windshield shade

When we bought our Honda Fit 15 years ago, one quirk we discovered was that its windscreen was too large for a standard-size windshield shade. We tried mocking up a shade out of cardboard, but it was unwieldy, so we sent away for a two-piece folding shade specially sized to fit our vehicle. That shade served us well until this spring, when we discovered that the fabric on one corner of one of the pieces had worn clean through, exposing the metal rim. I tried patching it up with duct tape, but after a couple of months in the hot sun, the adhesive melted and the tape started sloughing off.

Looking for a more permanent fix, I went hunting through my scrap bin for something to patch it with. The best candidate I could find was an old cloth face mask left over from the pandemic, which was reasonably sturdy but also flexible. I snipped off the ear loops, wrapped the mask around the corner of the shade, and applied a little hot glue to hold it in place. Then, to make sure it stayed put, I stitched all the way around it: up one side, across the top, down the other side, and across the bottom. 

I realized as I worked that I probably should have skipped the gluing step, as it was a lot of work to force the needle through four layers of fabric plus an extra layer of glue, but I got it to work in the end. The patched shade looks a little quirky, but it's secure now, and it can easily be unfolded to deploy it and folded to stash it away when not in use.

Quick fix #4: Thrift-shop wallet

This is yet another example of duct tape not proving to be a permanent solution. Last winter, after the zipper broke on my wallet, I attempted to cover the torn edges on my spare wallet with electrical tape. Unfortunately, it didn't stick very well, so I switched to black duct tape instead. That held up a little better, but eventually it also started to peel off, leaving the frayed edges not just exposed, but also covered in sticky residue. 

So I decided to give up on this flimsy plastic wallet and invest in a secondhand leather one from eBay. Unfortunately, my new-to-me "The Sak" wallet turned out to be far less sturdy than I thought. Only the outside was made from real leather; all the interior bits were fabric covered with a plastic coating, which began wearing off almost immediately. Within a matter of days, it was in even worse shape than its predecessor.

Luckily, I now have a replacement for it. Yesterday, after my monthly CCL meeting, we stopped by Goodwill, where the accessories bin yielded up this beauty:  a nifty little black quilted number big enough to hold my phone, notebook, bills, coins, and large assortment of cards. With tax, it was only $4.25 (clothes aren't taxed in New Jersey, but apparently accessories are). I was so pleased with my find that I elected to round it up and donate the change, since even at $5 it's a bargain.

Quick fix #5: Pants patching

Last month, I discovered that my pride pants—the blue jeans I'd mended with a little rainbow of embroidery floss—had a threadbare spot on the thigh. Not wanting to detract from my previous visible mending job, I tried to cover this hole as invisibly as possible with a patch on the inside secured by stitches running across both horizontally and vertically. 

Unfortunately, within just a few weeks after this patching job, the jeans developed a new, much larger threadbare area on the same thigh. I'm attempting to patch this one using the same method, but since it's a much bigger area, it's taking quite a bit longer. Because I'm hopeless with a sewing machine and I can't handle more than about half an hour of hand-sewing at a stretch, it's taken me several sessions just to get the horizontal stitches down, and I've still got all the vertical ones to add. 

Even as I'm going to all this trouble, I have to recognize that I probably won't be enough to extend the life of these pants by many months. If one thigh has already worn out, the other one probably won't be far behind, and that one will take another major effort to patch. If it were any other pair of pants, I might just give up and send them to textile recycling, but I'm so attached to my little rainbow repair that I'm willing to put in the effort to keep them alive just a little bit longer.