Even more ecofrugal episodes

Nothing happened this week that seemed big enough to warrant an entire blog post on its own, so instead I'm doing another of my ecofrugal episodes posts—a roundup of the small successes and failures in our ecofrugal life. Fortunately, this time the successes outnumber the failures. 

Item #1: A grout makeover  

My birthday request this year was for Brian to replace the grout in our upstairs tub-shower, which had developed stains that no amount of scrubbing could remove. (This photo—taken after the grout had just been cleaned—doesn't really do it justice, but it should give you an inkling of how bad it was.) It wasn't until this month that we finally had a free weekend to tackle the project, and we ran into a couple of setbacks while carrying it out. 

First, after he'd already scraped out as much as he reasonably could of the old grout, Brian discovered that the pre-mixed grout he'd bought to replace it was was actually sanded grout, which isn't recommended for narrow gaps like this. (It would have been nice if the package had said this on the front, rather than in small print on the back.) So we had to make a hasty trip to Home Depot to replace it. We also grabbed an extra tube of caulk, just in case we needed extra. At first, Brian thought this purchase had been a waste of money, since the old tube ended up having enough in it to fill all the joints. But he learned otherwise the next morning, when he discovered that the caulk he'd just applied, which was supposed to set up within two hours, was still liquid. Clearly it was no longer good, so he had to spend part of that morning laboriously removing all the goo and replacing it with fresh caulk from the new tube. 

So this birthday request proved to be more of a hassle than we expected, but it turned out well in the end. Every time I've stepped into the shower this past week, I've been delighted at how fresh and clean the grout looks now. Brian even took the extra step of repainting the grungy-looking trim on the tub window, so the whole enclosure now looks sparkling and new. Once the new grout has had a couple of weeks to cure fully, we're going to follow up by applying a sealant, which will allegedly keep it fresh and stain-free  for the next few years. And even when it wears off, we can just apply a new coat, rather than going through this entire messy job again.

Item #2: Pride pants 

Recently, I noticed that my older pair of blue jeans was starting to wear out in the thigh area. This is a common occurrence for me, but this time the pattern was a bit unusual: instead of spreading across the whole inner thigh area, the threadbare sections were confined to a line right along the inseam. I thought this would be a good spot for a little visible mending, but wasn't sure whether it made more sense to darn these tiny holes individually or try to cover all of them with a patch. 

I went hunting for suggestions online and came across this image: a long row of stitches in different colors of embroidery floss running down the length of the seam. I decided to try a similar idea, but with a rainbow color scheme. The whole worn area was about 12 centimeters long, so I divided it up into sections of roughly 2 centimeters for each color. I started at one end putting in parallel stitches in red embroidery floss, then about 2 centimeters down I tied off the red thread and started on orange, and so on down the spectrum to purple.

I've only done one seam so far, since the wear on the other isn't quite as bad, but eventually I intend to do the other one to match. The stitching is far from perfect, but it's colorful and cute and gives me a little boost of happiness every time I wear these jeans now. And it's just in time for Pride Month!

Item #3: Repair, then replace 

About a year ago, our old toilet seat broke. Rather than buy the cheapest model to replace it, we decided to spring for one with "soft close" hinges. I quite enjoyed this feature, but unfortunately, these slow-closing hinges weren't very durable. A couple of days ago, I noticed that the lid was askew, and when I examined it, I discovered that one of the hinges had snapped clean through. I managed to wiggle it through so that the lid could close fully, if no longer softly, but this clearly wasn't going to be a long-term solution.

Rather than run out to buy a whole new toilet seat, Brian decided to try repairing the hinge with epoxy. He applied the glue to both broken edges, then clamped the lid in the open position overnight to give it plenty of time to set. But sadly, as soon as he unclamped it in the morning and tried lowering the lid, it snapped straight apart again. 

Although this repair wasn't a success, I still think it was worth making the attempt. It didn't cost us anything except a little extra time, and we had no way of knowing it wouldn't work unless we tried it. And now that we know, we feel no guilt about discarding the broken toilet seat and spending $40 on a replacement. (This time around, we spent $10 more for one with metal hinges, which we're assuming will hold up better. Paying the extra $10 now seems like a better deal than spending $30 to replace the whole thing again in another year.)

Item #4: Whipping it good 

Ever since we first started cutting back on dairy products back in 2018, we've been looking for a decent substitute for whipped cream. We tried numerous homemade versions using various combinations of coconut cream, aquafaba, and plant milk, with results ranging from near success (but not quite) to colossal failure. We tried a commercial product called Coco Whip that worked reasonably well in a raspberry fool, but the store where we found it has since stopped carrying it. And we tried one or two commercial plant-based cream substitutes that were so unimpressive I didn't even bother blogging about them.

But on a couple of recent trips to Trader Joe's, we've noticed a product in their dairy case called "Vegan Heavy Whipping Cream Alternative." We couldn't remember if we'd tried this one before, but at only $4 a pint—about the same price as regular cream—we didn't have much to lose by giving it another go. So we grabbed a pint, and last weekend Brian took a crack at using some in a honeyberry fool (a phrase I love having the opportunity to say). And right away, we noticed that this stuff actually was whipping up like real cream. It formed genuine stiff peaks that held their shape and didn't collapse even when we folded in the berry mixture. And if the flavor and mouthfeel weren't exactly identical to real cream, you could hardly tell by the time it was combined with the berries.

We only used about half the pint for this experiment, so we're going to try tinkering with it further, seeing if it can make a plant-based ice cream that works better than our iced coconut cream (which didn't turn out so well the second time we tried it). If it works for that too, we'll probably stop messing around with DIY versions and make this our go-to substitute for any recipe that calls for cream—possibly even our anniversary cake.

Item #5: Extension cord life extension

One of the items we picked up at last year's yard sales (or, to be exact, from the piles of discards after the sales) was an electric hedge trimmer. It's just a light-duty plug-in model, but since our property only has one hedge and we only trim it a couple of times a year, it's been perfectly adequate for our needs. But last Friday, Brian discovered its biggest drawback: make one false move with it and you cut right through your extension cord. To add insult to injury, he had noticed that the cord was in harm's way and was just attempting to move it out of the way when it happened. 

Naturally, he was quite annoyed that this one brief slip had, as he thought, totally destroyed an extension cord that would cost around $17 to replace. But then he discovered that it's actually possible to cut off the damaged portion and attach a replacement connector, which only costs about $3. You just end up with a slightly shorter cord—in this case, 47 feet instead of 50, which is still plenty for our small yard. Less cost, less waste, and less frustration about having damaged the old one. (Of course, if this keeps happening, the cord will gradually get shorter each time until it's too short to be of much use. But I suspect after this incident, he'll take extra care to keep the cord out of danger in future.)

Two clothing repair challenges

It turns out my clever plan to reinforce the thighs of my corduroy pants with a honeycomb stitch really wasn't all that clever. It took me at least two hours to stitch both sides of the pants, and within three months, they were falling apart again. Not only had the threadbare area expanded well beyond the borders of the original darn, but the threads in the darned area itself had worn through and broken off in several places. This left nothing to protect the fabric underneath, which had started to develop actual holes. They were still small, but clearly re-darning the area wasn't going to do much to keep them from growing. If I wanted to save the pants, I was going to need a new fix.

Since darning hadn't worked, I decided to move on to an entirely different technique: patching. I didn't have any fabric remotely similar to the original grey corduroy, so I decided to go for a complete contrast instead. Down in my scrap bin, I had a fairly good-sized bolt of colorful striped fabric in good condition that we'd picked up at a yard sale or somewhere. I cut two pieces of this large enough to cover the threadbare areas on both thighs, right over top of the honeycomb stitching. That saved me the bother of picking it all out (and possibly weakening the fabric in the process). 

I left a little extra space around the edges of each patch so that I could hem them. I folded over the raw edge and sewed it down using a back stitch. They came out a little bit lumpy, but more structurally sound than just a chopped-off piece of fabric. 

Then, using my usual whip-stitch technique, I sewed the two patches in place. My first attempt was a little messy, as I didn't pin the fabric down first; I just followed the line of the seam in the pants. That worked fine along that one edge, but it didn't secure the entire patch well enough to keep it smooth and flat, so the fabric underneath ended up a little puckered. I couldn't bring myself to pick out the seams and do it over, but I did make a point of carefully pinning the second patch before stitching it so that it would come out neater.

All told, this repair took me a couple of hours, about the same as the first one. But I'm hoping it will hold up longer and maybe justify the amount of effort I put into it.

Sadly, I don't think there's any equally simple fix for the wardrobe item that most recently fell apart on me: my two-year-old black ankle boots. They already had cracks in the sole that Shoe Goo had proved unable to fix, making them too leaky to wear in the rain. But when I wore them out on a walk today, one corner of the heel simply disintegrated, leading me to suspect that I won't be able to wear them even in dry weather for much longer. 

You can't replace the heels on a cheap pair of boots like this, and at this point, there's so little left of the sole that there wouldn't really be anything to attach it to anyhow. The only question is whether I can come up with some sort of hack that will allow me to get another couple of months of use out of the boots—long enough to get me through the multiple rounds of trial and error it will no doubt take me to find a replacement.

A stitch in time

When Brian's jeans wear out, it's usually the knees that go first. This is a fairly easy area to repair: I simply sew on one of my pocket patches, salvaged from an older pair of jeans. This simple fix enables him to get another year or two of use out of them before they wear out completely.

With my own pants, however, it's a different story. The area most likely to get holes is the inside of the thighs, a much harder spot to repair. The best method I've come up with is to sew a patch over the inside, but it usually doesn't take too long before I wear through the patch as well. (Just this week, a patch I put in my black jeans last spring blew out completely, forcing me to consign the entire pair to the rag bin.)

Clearly, it would be much better if I could find some way to prevent, rather than repair, holes in this area. So when I noticed that my grey corduroys had developed two bald patches on the inner thighs where all the ribs had worn off, I wondered, could I reinforce the fabric there before holes developed? Would the same honeycomb darning technique I'd used on my old wool socks work over this much larger area?

I didn't know the answer, but I figured I didn't have much to lose by trying. If I did nothing, the pants surely wouldn't last the winter, so even if my attempt was a complete failure, I wouldn't be taking much off their lifetime. I went through my stash of embroidery floss, selected a nice bright turquoise that I thought would contrast well with the grey, and proceeded to stitch. 

Not surprisingly, repairing this large worn area was a much bigger job than darning the socks had been. The painted rock I use as a darning egg was much smaller than the area I needed to patch, so I slipped a hardcover book inside the leg of the pants and tucked the fabric under that. I threaded my needle with the longest length of floss I could manage, but it still was only enough to complete three rows of stitches, covering only a fraction of the bald patch. I had to thread it several more times before I was done, using up nearly an entire skein of floss.

I realized at this point that I'd made a tactical error in choosing the turquoise floss. I knew the assortment I'd bought at Michael's contained two skeins of every color, but apparently this was an extra I'd picked up somewhere else, and I didn't have an exact match for it. To do the other side, I had to choose another skein of a slightly different blue. I'll just have to hope that no one ever sees both repaired sides at once and notices the mismatch.

All told, the whole process took a couple of hours, spread out over two or three days. To most people, that may seem like an awfully big investment of time to save a pair of pants that cost me less than $10 at a thrift shop. But considering how hard it is for me to find new pants that fit, if this prolongs the cords' lifespan by at least a year, it will save me many frustrating hours of shopping to replace them. And if it doesn't, I'll know not to bother with it next time.

A pin-on pocket

Last year, a much-loved skirt that I'd worn for nearly 20 years finally wore out beyond my ability to repair. The fabric simply wore clean through, and because the skirt had a complicated, multicolor pattern, there was no way I could patch it that wouldn't look stupid. So, reluctantly, I began searching for a replacement. Eventually, I settled on a patchwork wrap skirt from The Little Bazaar, an online retailer that works with "small manufacturers from cottage or very small industry" to produce garments it describes as "ethnic and trendy look, Bohemian and hippie soul." Rather than buy it right away, I added it to my Gift Hero wish list, and sure enough, in January I received it as a birthday present.

In most ways, this new skirt is a pretty good substitute for its predecessor. The color palette isn't identical, so it doesn't work with all the same tops, but it can pair with many others that didn't match the old one. And since it's a wraparound, it will always fit, even if I lose or gain a few pounds. But there's one crucial feature it lacks: pockets.

Now, I don't rely on pockets for every part of my everyday carry. Like most women, I carry a purse that holds most of my stuff: wallet, keys, phone, sunglasses, a mini umbrella, and assorted other sundries such as my collapsible drinking cup and straw. But with all that stuff in the bag, it takes a bit of time to reach in and fish out anything I need. So I like to have at least one pocket in every outfit for things that I might need to grab quickly, such as a handkerchief. And with this skirt, I wouldn't have one. I could add a pocket to the outfit by pairing the skirt with a sweater or jacket, but that wouldn't be practical during the hottest days of summer.

So I started wondering if I could somehow add a pocket to this skirt. I was able to find lots of online tutorials about how to do this, but most of them rely on the same two basic methods, neither of which would really work with this skirt. The first involves opening up the side seam of the skirt to sew in a pocket—not an option, since this wraparound has no side seams. And the second, sewing patch pockets to the front, requires you to have fabric that matches the skirt—also not feasible with this variegated patchwork pattern. I considered trying to sew on a patch pocket in a coordinating solid color, but with my limited sewing skills, I was afraid I might mess up the skirt if I added anything visible to the outside.

My next idea was to construct a set of tie-on pockets. According to clothing historians, pockets that are actually sewn into garments are a relatively recent development: from the 17th through the 19th centuries, pockets were separate garments that could be worn either over or under a person's other clothing. This idea was appealing, since I'd be able to wear the standalone pocket with other clothes as well. But since the skirt itself is a wrap-and-tie style, I feared that having an additional garment tied around my waist over top of it would be awkward. 

What would really be ideal, I thought, was a pocket I could either tuck under the wrapped-over edge of the skirt or pin to the waist tie over top of it. Even with my rudimentary sewing skills, I figured I ought to be able to make something like that with the right materials. But what could I use?

Most of the remnants in the scrap bin were plain, utilitarian fabric, such as old blue jeans, that wouldn't fit with the skirt. But I managed to unearth one piece that looked like it would might work: a shoulder pad salvaged from an old shirt. Not only was it a colorful, patterned fabric in keeping with the skirt, it was already neatly machine-hemmed, so I wouldn't have to worry about my hand-sewn seams looking wonky.

Once I'd found this, converting it into a pocket was pretty straightforward. I used my trusty seam ripper to undo the seam along the straight top edge of the shoulder pad and pulled out the padding. Then I folded over the raw edge of the fabric and stitched it down. I then safety-pinned the resulting half-circle of fabric to the waist tie of the skirt, creating a little pocket at waist level. If I find the pocket works well in this position, I can try stitching it down more permanently. If it doesn't, I can simply unpin it and move it to a new location.

This new, temporary pocket isn't exactly roomy, but it's large enough for a handkerchief or any other small item I might need to slip into it. And it fits in fairly nicely with the "ethnic and trendy look" of the skirt. With its addition, I think this skirt will be as practical as it is charming.

What we're doing for Earth Day

This year, Earth Day overlaps with the start of Passover—which means, ironically, that we're going to spend it being a little less ecofrugal than usual. Normally we wouldn't drive anywhere on a Monday; Brian would either bike to work or work from home. But tomorrow, we'll have to drive to get to my parents' house for the Seder, and since my family isn't kosher, that meal will include both meat and dairy (a free-range chicken for dinner and ice cream with fruit compote for dessert). And our menu for the following week will also include more meat and dairy than usual, since many of the Passover-friendly recipes we know include either one or the other. 

Fortunately, Brian and I are making up for that by increasing our efforts in the lead-up to Earth Day itself. Over the past week or so, our earth-friendly activities have included:

1. Trying a new vegan restaurant. Last weekend, we went to a show with some friends in the nearby town of Metuchen, and they suggested meeting for dinner beforehand. I did a little investigation online to find a vegetarian-friendly restaurant in Metuchen and discovered one called Red's Leaf Cafe where the menu is 100 percent vegan. The place is quite small, with just a handful of tables, but everything we ordered—the shared oyster mushroom appetizer, Brian's sesame seitan, my orange lion's mane mushrooms over coconut rice—was very tasty. Unfortunately, it was also pretty pricey; the bill for our party of four, including tip, came to $160. So I don't think we'll want to visit there on a regular basis, but if we have guests we want to impress, it could be worth another trip.
2. My monthly Citizens' Climate Lobby (CCL) meeting. Most months, this group holds its monthly meeting on Tuesday night, with only a few people meeting in person and the rest joining via Zoom. This month, for a change, it met at a Unitarian church in Somerville on Saturday afternoon. (Brian helped make my trip up there more eco-friendly by driving me there and spending the time while I was at my meeting running errands in town.) My favorite part of the meeting was watching the monthly presentation from CCL's national organization, which featured an interesting speaker: Ernesto Alcantar of Potential Energy, the self-described "marketing team for planet Earth." His presentation focused on eight principles for having productive conversations about climate with people who don't live in our climate-activist bubble. His tips include "talking like a human" (avoiding jargon like "carbon footprint" and even "greenhouse gas"), avoiding partisanship, and focusing on "humans, not concepts."
3. More visible mending. After my success fixing the holes in Brian's socks with Scotch darning, I decided to try a new technique called honeycomb darning for reinforcing some worn areas that didn't have holes yet. This method involves putting in a series of blanket stitches running all around the edge of the worn spot, then looping through those stitches to add another row of stitches farther in, and repeating the process until you get to the middle. This video on YouTube does a good job of explaining the process, including what to do with the dangling "tail threads" at the end. One thing it doesn't show is what to do if, like me, you misjudge how much thread you need and end up running out before you've finished the job. I had to guess how to work in a new piece of thread to pick up where the first one ran out. But I later found a second video on the same subject that does show what to do, and its method is pretty much the same as mine, so apparently I guessed right.
4. Joining a stream cleanup. Several members of our CCL chapter took part in the Raritan Headwaters 34th Annual Stream Cleanup yesterday. (Since this blog is technically social media, I'll throw in the tags @raritanheadwaters and #RHAstreamcleanup here.) The area we were assigned to was Spruce Run Recreation Area in Clinton, which is actually along a reservoir rather than a stream. Our team of seven didn't go into or near the water itself; instead we donned yellow vests and combed the verge along a half-mile stretch of road near the park entrance. By far the most common type of trash we found was cigarette butts—over 150 of them—followed by plastic bottles and wrappers. (Little mini liquor bottles and cigarette butts were particularly likely to be found together.) The most unusual item we found was a piece of hardware that no one in our group, or in the larger group running the event, could identify. It's a...well, some sort of knob bolted to some sort of hinge, sort of? If you can figure out what it's for, please let me know.
5. Secondhand shopping. The stream cleanup happened to fall on the same day as the town-wide yard sales in Metuchen, so we couldn't spend the entire day strolling around and browsing sales as we normally would. But after coming home and having some lunch, we headed up to Metuchen to get in a couple of hours of yard-saling in the afternoon. Between the huge rummage sale at the First Presbyterian Church and a few other sales we visited in that same neighborhood, we managed to pick up three items of interest—a Fairport Convention CD, a peacock-blue T-shirt for me, and a Ngaio Marsh mystery—for $2.50 total. (Unfortunately, we then spent twice that amount at a local cafe on a cup of coffee for me, since I was practically falling asleep on my feet after our early morning and busy day.) Not a very impressive haul, but I followed up on it just now by ordering us a secondhand garlic press on eBay to replace the one that just fell apart as Brian was cooking dinner. (Since this one has a one-piece "rocker" design, with no moving parts, we know it won't break like its predecessor. And The Spruce Eats says it can mince ginger, too.)

Add all that in to our everyday earth-friendly activities, such as eating meatless meals, hanging our laundry, and Brian's regular bicycle commute, and I'd say we're not doing too badly.

These darned socks

Brian and I don't tend to spend a lot of money on clothing. Even our "investment pieces," like my fall coat and Brian's one good suit, typically come from thrift shops. But one item we don't cheap out on is winter socks. We both splurge on $22-per-pair Smartwool socks, which keep our feet cozy and warm without itching, and then wear them until they literally fall to pieces. I've always done my best to extend their lifespan by stitching up small holes as they formed, but eventually the holes would get too big to close up this way. At that point, our pricey socks would be fit only for the rag bin.

Once or twice, I attempted to salvage the socks by darning them. The only way I knew of to do this was the traditional weaving technique: make long stitches across the hole horizontally, then follow up with vertical stitches that weave in and out of the horizontal ones. Unfortunately, this never worked very well. If I put the horizontal stitches far apart, the weave was too loose, and if I put them close together, it was too hard to weave in between them. And in either case, it always came out lumpy.

That's why I was intrigued to learn about a visible mending technique called Scotch darning. With this method, you put in only one row of stitches at a time, as if you were knitting rather than weaving. Each row of stitches is secured to the row above it and is secured at either end to the good fabric outside the hole. (It's a bit hard to explain in words, but this YouTube video illustrates it quite clearly.) With this method, there's no worry about how to space the long stitches and no fiddling with weaving in and out between them. And if you make your thread too short and it runs out midway through the process, that's okay; you can just  start a new row and keep going, securing it to the one you just finished.

So I decided to give this method a try with one of Brian's Smartwool socks that had reached the limits of my normal darning abilities. I started out using some fine grey yarn that I'd had sitting around for years, but it kept breaking, so I switched to a heavier blue yarn that I'd received as part of a learn-to-knit kit. (All my attempts to make sense of the instructions in the knitting book had so far come to naught, so I figured there wasn't much sense in saving the yarn for a project I'd probably never manage to complete.)

It was a bit difficult to thread a needle—even my biggest "sailcloth" needle—with this thick yarn, but once I managed that, the actual stitching process went fairly smoothly. I quickly got the hang of the pattern: under the top row, under the bottom row, over the thread, pull it tight, and repeat. As one of the comments on the YouTube video observed, it was almost meditative. After I got the entire hole stitched up, I had Brian try on the sock, and while he could feel the difference between the darned area and the rest of the fabric, he said it wasn't uncomfortable. So I carried on, stitching up holes and worn areas in three more socks.

I ran into only two problems as I worked my way through this lot. First, the yarn kept getting twisted up as I tied it into loops, and I had to stop periodically and let it unwind itself. Second, I had trouble gauging how much yarn I needed to cover a hole completely. On my first attempt, I ran out of yarn and had to sister in a new length of yarn halfway down. The next time, I deliberately cut my yarn much longer than I thought I needed—far longer than the length of my arm, so that I had to stop after every stitch and spend a minute pulling the long strand through with both hands. This proved to be far more than I needed, leaving me with over a foot left over once the hole was completely covered. So I cut it off and used the extra yarn to get started on the next hole, only to find that it was once again too short and I had to re-thread the needle halfway through. I worked my way through four socks without ever really figuring out how much was the right amount.

Although this Scotch darning technique was a smooth enough process once I got going, it wasn't a quick one. I didn't time it, but I'm sure I spent at least an hour and probably over two hours getting through all four socks. It might have gone faster if I'd been using a finer yarn that was easier to get through the needle or if I'd known what amount to use, so that I wouldn't have to keep re-threading it in the middle of a hole. But even if I were doing it perfectly, it would still require a fairly significant investment of time. (Even the experienced sewer in the YouTube video takes nine and a half minutes to stitch up one medium-sized hole.) 

Given the time involved, this probably wouldn't be worth doing for cheap everyday socks. But taking an hour to repair a $22 pair of Smartwool socks is like earning a $22 hourly wage, and that beats New Jersey's minimum wage by nearly $7 an hour. Plus, it keeps them out of the landfill. And there's a certain satisfaction in sticking it to The Man by fixing my own darned socks (ha ha) instead of shelling out for a new pair like a good little consumer.

Further experiments with visible mending

After my first successful visible mending experiment last month, I decided to get a bit more ambitious. I went to Michael's and invested five bucks in 36 skeins of embroidery floss in assorted bright colors, allowing me to add more techniques—darning, embroidery, and sashiko—to my mending repertoire. 

The first repair I attempted with the new thread was darning another threadbare patch on one of Brian's jeans pockets. I already knew the basic idea—make long stitches going in one direction across the hole, then make perpendicular stitches that weave in and out through the first set—but I also watched a couple of videos about it online and did my best to copy their technique. Unfortunately, I didn't quite get the hang of it right away. I ended up placing the vertical stitches too close together, making it difficult to weave through them when going horizontally. As a result, the darned area came out a bit uneven and lumpy. Brian said he liked it anyway, but I'm not as happy with it as I was with my previous patching repair. 

So for my next repair, I decided to move away from darning and try a hybrid technique: a patch on the inside of the garment, secured in place with decorative stitching. The garment in question was my old pair of black jeans that had worn out in the thigh area. I'd already patched it once before, but the area around the patch had now worn out, leaving little sections of skin exposed. I thought at this point there was nothing to do but downgrade them to "grubby" pants for doing dirty jobs around the house and yard. But since I had nothing to lose at this point, I figured I might as well attempt a visible mend on these as well. 

First, I removed the old patches and tidied up the edges of the holes with scissors. Then I went back to that same old striped flannel shirt I'd used for patching Brian's pants and cut out a couple of pieces from the sleeve, large enough to cover the new, larger holes. I sewed those colorful patches to the inside of the pants using my usual whip-stitch technique. Then I turned the jeans right-side-out, selected a dark blue embroidery thread that coordinated with the fabric, and began top-stitching the patch to the intact parts of the jeans. 

I started out attempting to make a neat, decorative running stitch, as shown in this NPR article, but it came out too wonky-looking. My stitches were uneven in length and my lines had a tendency to wobble. So I picked all that out and started over using the seed stitch technique shown in this video, which is supposed to look random and chaotic. This came much more naturally to me. It was actually kind of fun pushing the needle in at a random spot, then taking off in a random direction from there, making stitches of varying length and even doubling back as needed to cover bare patches. It took quite a while, but eventually I ended up with a unique-looking repair that I wouldn't be embarrassed to flash a glimpse of to strangers while walking down the street. 

But while the patch-and-embroider technique worked well for these large holes, it didn't seem like it would be much use for the small holes in Brian's jeans pockets. For one thing, there's no good way to sew a patch to the inside of the jeans pocket without removing it. So for his last damaged pocket, I went back to exterior patching. I still had one more pocket flap on that old trusty flannel shirt that I could have used, but instead I decided to try repurposing an old, colorful fabric mask leftover from the early days of the pandemic. (I didn't think we'd be needing it again, since even if a new wave of COVID should strike, we now have some of the much more effective N95 masks to use instead.)

After cutting off the ear loops, I experimented with different placements for the patch that wouldn't require cutting it. (Having a piece of fabric that was already neatly hemmed on all four sides, I didn't want to mess with it.) I considered placing it vertically up the length of the pocket and tucking the end inside, but I feared the doubled-over fabric might be too bulky and interfere with the use of the pocket. So instead I just stitched it across the entire width of the pocket, overlapping it on both sides. Only after I had it in place did I realize I'd actually sewn it on upside down, with the folds of the mask pointing up instead of down. But since it didn't have to function as a mask, that didn't really seem to matter. I just tacked the flaps down with a set of loose stitches so they wouldn't flop around.

Unfortunately, after all these successes came a not-unexpected setback. The original pair of pants that started me off on this visible-mending kick, which already had patches on both knees as well as the back pocket, developed a visibly threadbare patch on the thigh. I didn't think adding a pocket patch in this area would work very well, and I feared that the patch-and-embroider technique I'd used on my own jeans would be a little too messy for such a visible spot. But I also couldn't bear the idea of seeing these jeans retired when I'd just managed to get them patched so nicely.

Hunting around for a way to mend the threadbare patch, I found myself turning yet again to that old striped flannel shirt. When cutting up the sleeve to make the patches for my jeans, I'd saved the cuff—a nice, long strip of fabric, ready-hemmed on all sides. What if I removed the cuff button on one end, stitched up the buttonhole, and sewed this long piece across the entire width of the jeans leg? It sounded kind of nutty, but Brian okayed the idea, so I gave it a go. 

The result isn't perfect. Even though I carefully positioned the patch and pinned it in place before stitching, it still somehow managed to come out a bit askew. But Brian doesn't mind it. In fact, he seems rather tickled with his new Franken-pants with their motley assortment of patches. And I'm quite pleased that he's willing to be a walking showcase for my visible mending efforts.

My first (sort of) foray into visible mending

When Brian's jeans wear out, it's generally the knees that go first. Years ago, I discovered I could deal with that problem by sewing a pocket from an old pair of jeans over the ripped area. At this point, most of Brian's jeans have such a patch over at least one knee.

With this technique, I'm able to keep the jeans in service long enough for them to start wearing out in a different area: the back pockets themselves. Specifically, the left back pocket, where he keeps his wallet. Apparently the friction of the wallet against the fabric, particularly as it's inserted and removed, is sufficient to wear little holes into the material. They're not usually big enough for things to slip through, but they're unsightly.

This week, it occurred to me that maybe these smallish holes would be good candidates for visible mending. While conventional mending aims to keep the patched or darned area as inconspicuous as possible, visible mending takes just the opposite approach, turning it into a decorative feature. There are several methods for doing this, including:

• Patching with one or more contrasting fabrics.
• Darning with one or more contrasting colors of thread or yarn.
• Applying a plain patch and then covering it with decorative top-stitching.
• Embroidering directly over a small hole.

Technically, my pocket patch technique is itself a form of visible mending, since it turns the patch into a feature rather than attempting to disguise it. But for these holes in the pockets, I thought I could attempt something a little more visible. Any repair in such a prominent area was bound to be noticeable anyway, so I thought I might as well make it look intentional. 

The hole I planned to tackle was on the larger side—large enough to poke a finger through, anyway—so I thought it would require a patch rather than a darn. But what to use for a patch? I habitually save worn-out jeans and trousers, but the material from those is pretty plain, not vivid enough to make an interesting contrast. I was also concerned about my ability to make a neat-looking patch. To keep it from fraying, I'd probably have to hem it, and anything hemmed by hand (the only way I can do it) is liable to come out looking a bit lumpy. 

I thought maybe a piece of wide ribbon would work, so I started going through our collection of gift wrappings, and there I happened upon a little Christmas stocking ornament that Brian had received years ago as a gift. It was made of red felt, with a burlap section at the top embroidered with Brian's name. Since we never have a full-size Christmas tree ourselves (they're not really compatible with adventurous cats), we didn't have a place to hang it, so it had just been sitting in amongst our wrapping materials. Could this make a reasonable decorative patch?

I decided there was only one way to find out, so I snipped off the top section, trimmed its edges, and started whip-stitching it onto the damaged pocket. Since the idea was for the repair to be visible, I used a cheery red thread that matched the flannel. The loose ends of the burlap poked out a bit, but I was able to tack them into place with some extra stitches. 

So now, Brian owns a pair of jeans that are (a tad ironically) monogrammed on the butt. It remains to be seen how well this patch will hold up in the wash; since I didn't follow the standard advice to use a type of fabric similar to the original garment, it's possible the material will end up fraying or puckering. But if it does, it shouldn't be too hard to pick out the stitching and replace the patch with something more suitable.

Of course, no sooner had I finished making this repair to the pocket than Brian discovered the other knee of the jeans—the one that wasn't already sporting a pocket patch—was starting to fray, so I had to patch that as well. On top of that, there was another worn area, higher up on the thigh, which I couldn't easily repair. So it's possible the jeans themselves won't last long enough for the patch to wear out. On the other hand, it's also possible that if this repair does work out, I could expand my visible mending techniques to other areas of the jeans as well.

I'd like to attempt a darning-style repair next, possibly on the other pair of Brian's jeans that currently has a damaged pocket. However, it appears that to make this look good, I'd need either embroidery floss or tapestry thread, as regular sewing thread is too thin to show up well. So this experiment may need to wait until I can get myself to a fabric store and pick up some additional supplies to play with.

 

[UPDATE, 3/19/24: As it turns out, my fear that this little burlap patch wouldn't stand up well to washing was too optimistic. It didn't even make it to its first washing before it began to fray around the edges. It was only the burlap that was damaged, not the underlying felt, but when removed the burlap, the plain red felt patch looked kind of silly by itself. So I removed that too and went hunting around for something better to replace it. 

After searching all the rag bins without success, my eye hit on an old flannel shirt of mine that I'd been keeping downstairs in the laundry room. It was already torn in a couple of places, so I'd relegated it to grubby-job duty. But it had plenty of good fabric on it, and after a little examination, I spotted a section that looked like it would make a perfect ready-made patch: the flap on one of the front pockets. I carefully snipped it off, sewed the little buttonhole closed, and then stitched it in place over the entire bottom of the damaged jeans pocket.

I think this new flannel patch looks much nicer than the previous one, and I believe it will hold up better too. And Brian loves it.]